All Best Podcasts

It is common to think that having more money will be the solution to all problems and worries. However, things are not so simple. A strategy to reflect and take action on money can be defined in five steps:
Find More About Money Advice By Listening Our Podcast
1. Follow good habits
All people have a certain way of relating to money. It is possible to acquire good habits from parents or relatives, but there are also aspects that must be improved in the relationship with him.
Therefore, as a first step, the recommendation is to reflect and analyze how the money is being used , is it spending more than it is earned? Ideally, debts do not exceed 30% of monthly income.
2. Acknowledge expenses
However, that is where a problem arises, as many do not know how to manage their money responsibly. The main suggestion is to group expenses into two categories: needs and wants.
Now, even after the pandemic , the task has become more complex. Well, the "normal" needs that were had in previous times now became desires, or vice versa.
We can say that the needs are those expenses that are made monthly to maintain a lifestyle , for example, the payment of electricity, rent, education, food, etc. Wants, on the other hand, refer to expenses that go beyond needs.
Each one establishes their needs and desires according to their lifestyle and way of relating to money. For example, now with hybrid work, having a personal laptop and a good internet signal become essential tools to work, so these elements that could previously be considered as wishes become necessities.
3. Separate at least 10% of your income each month
A useful piece of advice is that before paying the fixed expenses, what we call needs, it is advisable to try to reserve at least 10% of the income to invest it.
The objective is not only to save money for a period of time until you can spend it on some desire, but to apply that value so that it yields interest and becomes an important asset in the future. At first it may be difficult to “let go” of that 10%, but the long-term result will be worth it and in less than a year you will start to see the results.
4. The bank as an ally
Throughout life, needs and wants change . This means that, at certain times, people will need more money than they receive monthly. The safest way to obtain it is the financial system. Banks have many savings and loan products to help make a person's relationship with money profitable and future-proof.
The recommendation is that when a person approaches a bank, they should ask as many questions as possible so as not to have any doubts about the benefits received and the commitments assumed.
5. Take care of the credit history
At the time a bank lends money, whether through a credit card, a personal loan , a vehicle loan or a mortgage , a profile of the applicant is immediately created to know if the obligations are paid on time. That is the credit history and it is decisive to establish a healthy relationship with the financial institution.
Check our podcast - https://podcasts.apple.com/us/podcast/money-rehab-with-nicole-lapin/id1559564016

Support the show

Just as we worry too much about some things, such as choosing that outfit that we are going to wear at a late-night dinner with our friends, there are others that we hardly pay attention to, and precisely they do matter.
To Know More About Vogeni, Then Check Our Website.

Have you ever stopped to think about whether you wear the right underwear? Rather, have you ever wondered what your underwear should look like? The answer in most cases is negative, since these types of accessories that cover our intimate areas sometimes go completely unnoticed and we buy either the cheapest or the most eye-catching, but are these models really effective? How is the fabric? Does it have characteristics that ensure our intimate health?

There are many questions that you can ask yourself, as many as existing fabrics and fabrics that are likely to be the star material of our underwear, which you can get at a good price by benefiting from discount coupons on underwear from Discounts Ideal, but the reality is that only one is positioned as the best, cotton. Yes, we know that it is not sexy at all, but wearing cotton underwear is the best for taking care of our intimate area, not only because it is comfortable, but because of much more that we will tell you below. Take note!

Balances the vaginal pH: in the case of girls it is highly recommended because cotton underwear helps keep the pH of their skin well balanced, which is normally 5.5. Otherwise, this pH is altered due to various factors, such as medications and birth control pills, which can lead to infections.

Hypoallergenic: cotton underwear prevents skin allergies, even more so if you have very sensitive skin. With it, forget about rashes, redness and itching. Hence, it is highly recommended in case of suffering from an infection in your intimate area, since it will benefit you.

Healthy: unlike linen or silk underwear, cotton underwear is free of chemicals, so it does not usually cause allergies or any other type of skin problems.

Absorbent: another of its characteristics is that it is highly absorbent, which means that especially in summer it will be our great ally, since even if we sweat, it will keep us cool and offer better ventilation of the area by preventing the accumulation of moisture, since with cotton underwear moisture evaporates much faster.

Durable: why would you want linen or silk underwear that will last you two days? Cotton is one of the most durable materials, so garments made from it usually last for several months despite washing and continuous use, and can be washed with both hot and cold water.

With this information we hope that you are already clear about what type of underwear to choose, so do not hesitate and surrender to the incredible qualities of cotton.
For more information - https://www.vogeni.se/

Support the show

The injection molding process is widely used in the production of large batches of parts, as it produces a comparatively low amount of scrap and has high repeatability. The versatility of the injection molding process demands much broader design considerations. Most of the design considerations will be made in the mold after the product requirements are established.
To find more information about Plastic Injection Molding Manufacturer then check our website.
Some of the factors that affect injection molding design are: the end use of the part (single product or for assembly), its dimensional and mechanical requirements, and its ability to withstand elements such as chemicals or pressure. Here are some vital tips to keep in mind when designing for injection molding.
1. Carefully choose the right materials for your design
Different injection molding materials offer different properties. For example, some injection molding materials offer more dimensional stability than others. Similarly, some stick better to adhesives than others. Material design takes into account: temperature, pressure, and biological and chemical interactions.
Thermoplastic resins can be broadly classified as amorphous and semicrystalline . While semi-crystalline thermoplastics offer greater chemical and electrical resistance, their amorphous counterparts are much more dimensionally stable and more impact resistant. Material selection may affect the required tolerance level or certain characteristics, such as wall thickness.
2. Consider the tolerance of the part
Tolerances are affected by shrinkage that occurs during the cooling process. Amorphous materials like PLA typically have tighter tolerances than semi-crystalline materials like PEEK.
Close tolerances make it more expensive to produce, but may be necessary for your part to fit or function properly, especially if used in an assembly.
We recommend that you contact your supplier at the design stage to discuss the tolerance standards they use.
For example, DIN 16901 contains a general table of tolerances as a reference for different materials. If your supplier uses this standard and you need tighter tolerances or other standards, they will ask you to provide 2D drawings.
3. Choose the right wall thickness
There are a few key points to keep in mind to ensure you choose the right wall thickness for your injection molding design:
Thinner walls shorten cycle time and lower the cost of your part. For many applications a wall thickness of 1.5-2.5mm is sufficient, but you can also refer to recommended wall thicknesses for different materials.
Unlike CNC machined parts, plastic injection molded parts benefit from consistent wall thickness. If a piece is thicker in one section than another, a sink mark will appear there.
Non-uniform wall thicknesses also cause warping, as these walls cool and shrink at different rates. If non-uniform thickness is required, the thickness change should not exceed 15% of the nominal wall thickness and should always have a smooth or tapered transition to achieve a high quality part.
Our Website - https://www.djmolding.com/

Support the show

Electronic adhesive glue, also known as electronic adhesive or conductive adhesive, offers several benefits in various electronic applications. Here are some advantages of using electronic adhesive glue:
Find more information about Electronic Adhesive Glue Manufacturers on our website.
1. Bonding and Adhesion: Electronic adhesive glue provides strong bonding and adhesion properties. It can securely bond different types of materials used in electronic devices, such as metals, ceramics, glass, and plastics. This helps in creating reliable and robust connections between components.
2. Electrical Conductivity: Conductive adhesive glues contain conductive particles, such as silver, copper, or graphite, which enable electrical conductivity. These glues can be used to create electrical pathways or connections between components, replacing traditional soldering methods in some cases. Conductive adhesives are particularly useful for flexible circuits, touchscreens, and other applications where soldering may not be suitable.
3. Thermal Conductivity: Some electronic adhesive glues are formulated with thermally conductive materials. These glues provide effective heat transfer properties, allowing them to dissipate heat generated by electronic components. This is especially important in applications where thermal management is crucial, such as power devices, LED lighting, and automotive electronics.
4. Stress Relief: Electronic adhesive glues can act as stress-relieving agents by absorbing and distributing mechanical stress caused by thermal expansion, vibrations, or shocks. This helps in reducing the risk of damage to electronic components and extends their lifespan.
5. Vibration Damping: Certain electronic adhesive glues have vibration damping properties, which can mitigate the effects of vibrations and mechanical resonances. This is beneficial in applications where vibrations can degrade performance or cause component failure, such as aerospace and automotive electronics.
6. Environmental Resistance: Many electronic adhesive glues are designed to withstand harsh environmental conditions, including temperature extremes, humidity, chemicals, and UV radiation. They offer excellent resistance to moisture, corrosion, and other environmental factors, ensuring long-term reliability of electronic assemblies.
7. Ease of Application: Electronic adhesive glues are available in various forms, including liquids, gels, pastes, or films. This provides flexibility in application methods, allowing for precise dispensing or coating onto components. Additionally, some adhesive glues have fast curing times, enabling efficient production processes.
8. Repairability and Reworkability: Unlike soldering, electronic adhesive glues offer the advantage of easy repair and rework. Components can be removed or replaced without the need for high temperatures, allowing for efficient repairs or upgrades in electronic assemblies.
It's important to note that the specific benefits and suitability of electronic adhesive glue depend on the application requirements, such as the type of components, operating conditions, and performance expectations. Therefore, it's advisable to consult adhesive manufacturers or experts to determine the most appropriate adhesive for a particular electronic application.
Our Website - https://www.electronicadhesive.com/

Support the show

Once we have passed the subject of natural cosmetics and have mastered terms such as cruelty free , sustainable or vegan , it is time to expand our vocabulary -and our beauty habits- towards zero waste . A current that refers, literally, to the absence of waste, and that advocates using products that do not generate waste (either with their mode of application, with their packaging , etc.). Something that we have already internalized with solid shampoos or similar elements, but that we can also put into practice with certain single-use accessories, which we can increasingly find in reusable format. It is the case of thewet wipes, cotton swabs or, in the case at hand, make-up remover discs .
Check Our Best Product
Reusable Makeup Remover Pads

Why use reusable makeup remover pads?

Although the bad reputation is usually taken by the wipes -after all, they are one of the main polluting elements of beauty-, the discs are not far behind either. Bearing in mind that they are disposable, the amount of waste they generate is much higher than we imagine, without forgetting that their cotton-based composition (normally not organic) is not the most sustainable option for the planet either. If, for example, we use two discs daily to remove mascara, and another one to apply a toner on our face, we spend a minimum of 21 discs a week, a not insignificant figure if we multiply it on a monthly or annual level for each person who employs them. Also, considering their low price and long life, reusables are a much more affordable option.

How long do reusable makeup remover pads last?

Although the life of the reusable alternative is not eternal either -because it will wear out with continued use-, it is much longer than that of disposable discs. Everything will depend, of course, on the brand we choose, its composition and proper care, but to get an idea, the average is usually around 1,000 uses .

What are scratch disks made of?

Again, here it will be a question of each brand, but it is important to look at its composition when buying them, because we run the risk of finding alternatives that are not the most suitable for the skin or that are not made with sustainable materials. whose look and feel is very similar to that of traditional discs, the founder of the firm explains that they have avoided using only cotton, since "it consumes a large amount of water and energy in its production", so its product is made up of “ 70% wood fibers and 30% short-fiber cotton , which cannot be used in the creation of textiles”.

However, not all cotton options are bad, but it is important to look at where it comes from and how it has been treated. For example, in Freshly Cosmetics they opt for a product made 100% with this material, but they emphasize that it is " organic and GOTS (Global Organic Textile) certified, thus allowing it to be responsible with people and the environment", they point out from the brand.
Our Product Page - https://www.amazon.co.uk/Reusable-Washable-Extra-Large-Double-Sided-Microfiber/dp/B07TCSVM78

Support the show