A Dynamic Panel Discussion with the Digital Foam Architects Network
02/20/24 • 64 min
The innovative and intricate world of Digital Foam is an evolution of polymer lattice structures. In the past, developing applications for polymer lattice structures, especially for performance applications, has been challenging. Challenges include aspects of design, printing, post-processing, and materials. All the value chain elements influence each other, adding more complexities.
In this special episode, Host Fabian Alefeld speaks with four panelists from the Digital Foam Architects Network about the full process chain and the complexities and opportunities of Digital Foam. Joining the panel discussion are Pierre Gonnetan, business development manager at Arkema, Mike Schorr, general manager at DyeMansion, Nick Florek, CEO of General Lattice, and Dr. Dave Krzeminski, senior Additive Minds consultant at EOS. The goal of the Digital Foam Architects Network is to increase accessibility, scalability, and speed up development for performance-based lattice structures.
Comments about the show or wish to share your AM journey? Contact us at [email protected]. The Additive Snack Podcast is brought to you by EOS.
Key takeaways:
[3:08] The history of polymer lattice structures and methodologies of production with Nick Florek
[7:54] Dave Krzeminski on overcoming the challenges of an ever-changing technology
[15:00] Objectives and initiatives of the Digital Foam Architects Network
[19:41] Pierre Gonnetan on the material landscape and key drivers for digital foam applications
[31:03] Mike Schorr on the importance of post-processing aspects of Digital Foam.
[38:41] Mike Schorr explains the complex process of creating uniformity in powdering, coloring, and smoothing polymers.
[48:48] Nick Florek unpacks the coordination and parameters of the digital design phase.
[56:23] Additional industrial opportunities for Digital Foam applications.
Resource Link:
The innovative and intricate world of Digital Foam is an evolution of polymer lattice structures. In the past, developing applications for polymer lattice structures, especially for performance applications, has been challenging. Challenges include aspects of design, printing, post-processing, and materials. All the value chain elements influence each other, adding more complexities.
In this special episode, Host Fabian Alefeld speaks with four panelists from the Digital Foam Architects Network about the full process chain and the complexities and opportunities of Digital Foam. Joining the panel discussion are Pierre Gonnetan, business development manager at Arkema, Mike Schorr, general manager at DyeMansion, Nick Florek, CEO of General Lattice, and Dr. Dave Krzeminski, senior Additive Minds consultant at EOS. The goal of the Digital Foam Architects Network is to increase accessibility, scalability, and speed up development for performance-based lattice structures.
Comments about the show or wish to share your AM journey? Contact us at [email protected]. The Additive Snack Podcast is brought to you by EOS.
Key takeaways:
[3:08] The history of polymer lattice structures and methodologies of production with Nick Florek
[7:54] Dave Krzeminski on overcoming the challenges of an ever-changing technology
[15:00] Objectives and initiatives of the Digital Foam Architects Network
[19:41] Pierre Gonnetan on the material landscape and key drivers for digital foam applications
[31:03] Mike Schorr on the importance of post-processing aspects of Digital Foam.
[38:41] Mike Schorr explains the complex process of creating uniformity in powdering, coloring, and smoothing polymers.
[48:48] Nick Florek unpacks the coordination and parameters of the digital design phase.
[56:23] Additional industrial opportunities for Digital Foam applications.
Resource Link:
Previous Episode
The Biggest Influencer in 3D Printing - Joel Telling, The 3D Printing Nerd
Consumer 3D printing and industrial additive manufacturing (AM) are more closely related than many in the industry realize. Supply chain considerations, material development, and the ever-growing need for a robust workforce are valid concerns for both movements.
In this episode, Host Fabian Alefeld speaks with YouTube influencer and content creator Joel Telling, the 3D Printing Nerd. Together, they dive into the fascinating interface between consumer and industrial 3D printing. Joel transitioned from software development to becoming a leading voice in the 3D printing industry with more than 600k subscribers to his 3D Printing Nerd YouTube channel. Joel is a key voice in the industry, an additive expert himself, and a friendly face to EOS in the 3D printing industry.
Comments about the show or wish to share your AM journey? Contact us at [email protected]. The Additive Snack Podcast is brought to you by EOS.
Key takeaways:
[1:56] The adoption of additive manufacturing in various industries has a lot to do with public perception.
[8:55] Joel describes the challenge of integrating additive’s industrial applications with consumer products and applications.
[17:15] How Joel transitioned from software engineer to the AM influencer, The 3D Printing Nerd.
[21:23] How software engineering works within the additive manufacturing framework.
[25:15] Why understanding the industrial and consumer side of AM is beneficial for the entire industry.
[29:53] Joel’s recommendations for consumer machines and materials for newbies wanting to experiment with 3D printing projects.
[40:16] Joel’s advice for those interested in 3D printing, find a community of like-minded people, and meet up.
Next Episode
Creating the Future of Energy with Dr. Alaa Elwany
The US has always been a hotbed of innovation. With the integration of additive manufacturing (AM), AI, and advancements in materials and manufacturing technologies, creating clean, abundant energy is within reach. This conversation highlights the role of AM in next-generation energy technology.
Host Fabian Alefeld speaks with Dr. Alaa Elwany, science and technology policy fellow at the U.S. Department of Energy, Advanced Manufacturing Office. Alaa is a recognized expert in additive manufacturing and a key advisor in the realm of science and technology to the U.S. government. He is currently serving as a science and technology fellow at the US Department of Energy and as a professor at Texas A&M at the Department of Industrial and System Engineering. Fabian and Alaa talk about Alaa's experience within the DOE, the intersection of AM and energy, the future of smart manufacturing and digital manufacturing, and resources for business owners looking to expand their AM opportunities.
Comments about the show or wish to share your AM journey? Contact us at [email protected]. The Additive Snack Podcast is brought to you by EOS.
Key Takeaways:
[1:24] Alaa explains his role within the DOE and how he and his team are shaping the future of energy.
[3:36] Additive manufacturing is versatile and scalable enough to be used in major clean energy projects.
[8:18] Materials that have a high relevance to energy applications.
[11:38] Additive’s foundational role in increasing supply chain resilience.
[16:48] Next-gen energy technology includes additive manufacturing.
[20:48] The future of integrating smart manufacturing and AI into additive manufacturing.
[30:33] The vital role of government investment, regulation, and support for the future of additive and smart manufacturing.
If you like this episode you’ll love
Episode Comments
Generate a badge
Get a badge for your website that links back to this episode
<a href="https://goodpods.com/podcasts/additive-snack-376606/a-dynamic-panel-discussion-with-the-digital-foam-architects-network-53840273"> <img src="https://storage.googleapis.com/goodpods-images-bucket/badges/generic-badge-1.svg" alt="listen to a dynamic panel discussion with the digital foam architects network on goodpods" style="width: 225px" /> </a>
Copy